Taizhou Rufeng Machinery Co., Ltd. 中文版 |  ENGLISH
HomeAbout UsNewsProductsNetworkOrderLocationContact
 
 
 
PRODUCTS
Spindle unit series
CNC machine spindle series
Longmen milling machine spindle series
Special spindle series
 
News
Car maintenance three misunderstandings
Release time:2015.02.07 News source:Taizhou Rufeng Machinery Co., Ltd.机床主轴,主轴单元
 

Car owners have love for your own car plus, often frequent maintenance, not too easy maintenancein maintenance errors, the result would run counter to one's desire. Below such as machine toolspindle to introduce several maintenance errors:

* a misunderstanding: the filter together

Many owners once feel car idle problem, immediately went to the 4S store replacement filter, think that as long as the filter clean, the car running no problem.

While some 4S shop repair personnel, in order to earn time cost, also be willing to accept therequest of owner, will filter and replace.

Auto complete need not be replaced together, because from a professional point of view, steamfilter is replaced in the 30000 km, machine filter replacement in the 5000 km, the air filter can bereplaced in the 10000 km, if replaced at the same time is a waste of. As Feng Machine Tool Spindlesaid if it is long time no car park, not only the replacement of all filter, replacement of oil and filtercan.

* two errors: Oil discontent does not give up

The new car just over 5000 kilometers of the first security, a few days ago ran a high speed of 3000 km. He is worried about the new car engine oil is not enough, the friend sent a bottle of oil added.But some time down, the car began to burn oil. The 4S shop inspection, just know is too full of oil and the reasons.

Many owners know the oil is not enough will damage the car, without thinking too much oil willdamage the car. Add too much oil is a novice is apt to make mistakes. If the oil adding too much, will cause the engine crank handle at work, the connecting rod big end produce violent agitation, not only increase the power loss inside the engine, but also make the spilled onto the wall of oil increases, produce burning exhaust oil phenomenon. As Feng Machine Tool Spindle recommend owners add oil, must take the scale on the engine oil rule prevail.

* three errors: frequent waxing without stopping

Many owners like often waxing the car, think this will not afraid of acid rain and snow, also can letthe car paint Its brightness dazzles the eyes., but frequent waxing will bring a lot of damage to thecar.

As Feng said waxing machine tool spindle is beneficial to the maintenance of the car and maintenance, but the frequent waxing will bring harm to car paint, because some wax containing alkaline substances, long time use can cause the body to become black. The South more rain, and contains a large number of acidic substances, so waxing can be relatively some more, and the north of the car there is no need frequent waxing, if the owners usually park the car in the garage,every four months to fight a wax on the line, if often parked in the parking lot, every two months to play a wax can be, waxing the best choice when the ability to moderate and decontaminationpolishing agent composition not containing wax.

 
 
 
Copyright © 2012 Taizhou Shuangqiang Driving Machinery Co., Ltd. All rights reserved
ADD:Mechanical & Electrical Park, Yucheng Sub-District, Yuhuan, Zhejiang TEL:+86-0576-89926969,89929863 FAX:0576-87205260 Technical support:www.censt.cc